programa LDmicro com nextion (by Dalci)
Someone would have a simple LDmicro program with nextion, I'm having difficulties with this data exchange.
Thank you all.
mikroProg suite for PIC (by Jakes)
Hi
Has anyone used mikroProg suite for PIC to program (write) pic.
I can write and verify hexcode with no errors but the simple program attached have all outputs permanantly on.
Thanks
Jakes
(no subject) (by MGP)
It's normal, RB0 to RB7 have internal pullups resistors at the input, so all outputs are going high.
Use portB as output and portA as inputs or invert the outputs in the program or connect the buttons to the GND.
This is what I like the most, you do not need resistors when using buttons.